Table of Contents
The Last Known Good Configuration (LKGC) is a process that Windows uses to save system settings before certain types of system failures. When a system failure occurs, Windows can use the LKGC to restore the system to its last known good state. This can be useful if the system failure was caused by a driver or software update that is no longer compatible with the system.
To access the LKGC, you will need to boot into the Windows Recovery Environment (WRE). To do this, you will need to have a Windows installation disc or a recovery drive. If you do not have either of these, you will need to create a recovery drive.
Once you have booted into the WRE, you will need to select the "Troubleshoot" option. From here, you will need to select the "Advanced options" option. Finally, you will need to select the "Last known good configuration (advanced)" option. This will boot the system into the LKGC.
How do I get last known good configuration Windows 10?
What does last known good configuration do?
The Last Known Good Configuration (LKGC) is a Windows operating system recovery option that uses the most recent system settings that worked correctly. When you select this option, the operating system uses the configuration information that was saved when the system was last shut down properly. This option is useful if you suspect that changes to drivers or system configuration settings might have caused your problem.
What is last known good settings for BIOS?
The last known good settings for BIOS are the settings that were last used to successfully boot the system. To access the last known good settings, you will need to enter the BIOS setup utility and navigate to the appropriate menu. The exact steps will vary depending on the make and model of your BIOS, but the general process is as follows:
1. Enter the BIOS setup utility. This is usually done by pressing a key during the boot process, such as F2, Esc, or Del.
2. Navigate to the menu that contains the last known good settings. This menu is usually labeled something like "Boot Options" or "Boot Order".
3. Select the last known good settings and save your changes.
4. Exit the BIOS setup utility and reboot the system.
Does last known good configuration delete files?
No, last known good configuration does not delete files.
How do I restore my computer to the last known good configuration?
If you would like to restore your computer to the last known good configuration, you may do so by following these steps:
1. Click Start, and then click Control Panel.
2. Click Performance and Maintenance, and then click System.
3. On the System Properties page, click the Advanced tab.
4. Under Startup and Recovery, click Settings.
5. In the System Startup area, click Last Known Good Configuration (your most recent settings that worked), and then click OK.
6. When you are prompted to restart the computer, click Restart.
Why is F8 not working?
There are a few possible reasons why the F8 key might not be working:
1. The F8 key may be disabled in the BIOS. To check if this is the case, restart your computer and enter the BIOS. Once in the BIOS, look for a setting that says something like "F8 Boot Menu" and make sure it is enabled.
2. Another possibility is that the Windows boot options have been disabled. To check this, open the Start Menu and type "msconfig" into the search box. Once the System Configuration window opens, go to the "Boot" tab and make sure the "Safe boot" option is not checked.
3. If neither of the above solutions work, it is possible that the F8 key is simply not working properly. In this case, the best course of action would be to take the computer to a qualified technician to have it checked out.
Where is last known good configuration stored?
The last known good configuration is stored in the Windows Registry. To access it, you need to go to the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Once you are there, you will see a value called LastKnownGood. This value contains the last known good configuration.
Does Windows 10 have system Restore?
Yes, Windows 10 has a system restore feature that can be used to restore your system to a previous state. To use this feature, you will need to create a restore point. To do this, you can go to the Control Panel and search for “System Restore”. Once you have found the system restore feature, you can follow the prompts to create a restore point.
What is last known good configuration in Safe Mode?
The last known good configuration is a feature in Safe Mode that allows you to boot your computer using the last known good configuration. This can be useful if you have recently installed a driver or program that is causing your computer to crash.
Is last known good configuration the same as System Restore?
No, last known good configuration is not the same as System Restore. System Restore is a feature in Windows that allows you to roll back your system to a previous state. Last known good configuration is a feature that allows you to boot your system using the last known good configuration.
Why is my computer showing automatic repair?
There are a few reasons why your computer might be showing the automatic repair screen. One possibility is that your computer is having trouble booting up and is automatically running a repair tool in an attempt to fix the problem. Another possibility is that you have recently installed a new piece of hardware or software and the computer is automatically running a repair tool to try and fix any potential conflicts.
If you’re not sure why your computer is automatically running repair, you can try restarting it and see if the problem persists. If the problem does persist, you can try running a manual repair tool to see if that can fix the issue. If you’re still having trouble, you can contact a computer technician for further assistance.
What does F9 do Windows?
F9 on Windows typically opens the "Recovery" menu. This menu allows you to access various tools to troubleshoot your Windows installation.
What is the F12 boot menu?
The F12 boot menu is a menu that allows you to select which device you would like to boot from. This can be useful if you have multiple devices connected to your computer and you want to choose which one to boot from. To access the F12 boot menu, you will need to press the F12 key when the boot menu appears.
What does F9 do on startup?
F9 on startup is typically used to enter the BIOS menu. However, the function of the F9 key may vary depending on the manufacturer of your computer.