How to Fix Automatic Repair Loop Windows 8.1?

If you’re a Windows 8.1 user and you’ve encountered the automatic repair loop issue, don’t worry, you’re not alone. This frustrating problem occurs when your computer continuously enters the automatic repair mode, preventing you from accessing your system. However, there are several steps you can take to resolve this issue and get your computer back to normal. In this tutorial, we will guide you through the process of fixing the automatic repair loop in Windows 8.1.

Step 1: Start by turning on your computer and immediately pressing the power button to force shutdown. Repeat this process three times until the Automatic Repair screen appears.

Step 2: On the Automatic Repair screen, click on the "Advanced options" button.

Step 3: In the Advanced options menu, select "Troubleshoot."

Step 4: Choose "Advanced options" again.

Step 5: From the list of options, click on "Command Prompt."

Step 6: In the Command Prompt window, type the following command and press Enter:
bcdedit /set {default} recoveryenabled No

Step 7: Once the command executes successfully, close the Command Prompt window and select "Continue" to exit the Advanced options menu. Your computer should now boot normally without entering the automatic repair loop.

By following these simple steps, you can overcome the automatic repair loop problem in Windows 8.1. Remember to exercise caution while using the Command Prompt and ensure that you properly enter the command specified. Resolving the automatic repair loop will allow you to regain access to your computer and continue using it efficiently.

Video Tutorial:How do I fix Windows 8.1 automatic repair?

How to repair Windows 8.1 using command prompt without CD?

Repairing Windows 8.1 using the command prompt can be a useful troubleshooting method when you encounter issues with your operating system. Here’s a step-by-step guide on how to repair Windows 8.1 using the command prompt without a CD:

1. Boot into the Advanced Startup Options: Restart your computer and repeatedly press the F8 key before the Windows logo appears. This will bring up the Advanced Startup Options menu.

2. Select "Advanced options": Navigate to the "Advanced options" menu and choose "Command Prompt" from the list.

3. Access the root directory: In the Command Prompt window, type "C:" and press Enter to switch to the root directory of the C drive. This is where you’ll initiate the repair commands.

4. Run System File Checker (SFC) scan: Type "sfc /scannow" and press Enter. The System File Checker will scan and repair any corrupt or missing system files on your Windows 8.1 installation.

5. Run Deployment Image Servicing and Management (DISM) command: After the SFC scan completes, type "DISM /Online /Cleanup-Image /RestoreHealth" and press Enter. This command will check for component store corruption and replace any damaged files with healthy ones from Windows Update.

6. Restart your computer: Once the repair processes complete, type "exit" to exit the Command Prompt. Restart your computer and see if the issues you were experiencing with Windows 8.1 have been resolved.

By following these steps, you can effectively repair Windows 8.1 using the command prompt without the need for a CD. Remember to back up your important files before performing these repairs and ensure you have a stable internet connection for the DISM command to retrieve replacement files from Windows Update.

What to do when startup repair doesn t work?

When startup repair doesn’t work, it can be frustrating, as it indicates that there are deeper issues with your system. However, there are several things you can try to troubleshoot the problem. Here’s a step-by-step approach to address the issue:

1. Check for hardware problems: Ensure that all your hardware components are connected properly. Look for loose cables or connections and ensure that everything is securely plugged in. You may consider reseating components such as RAM or graphics card if necessary.

2. Try Safe Mode: Restart your computer and repeatedly press the F8 key before the Windows logo appears. This will bring up the Advanced Boot Options Menu. From there, select "Safe Mode" and let your computer boot into this mode. Safe Mode loads a minimal set of drivers and services and can help identify if any problematic software or drivers are causing the issue.

3. Use System Restore: If your computer was working fine before and suddenly faced startup issues, you can try restoring your system to a previous working state using System Restore. To access it, boot your computer into Safe Mode and go to the "Control Panel." Search for "System Restore" and follow the on-screen instructions to roll back your system to an earlier date.

4. Run CHKDSK: CHKDSK (Check Disk) is a built-in Windows utility that checks for errors on the hard drive and fixes them if possible. To run CHKDSK, open the Command Prompt as an administrator and type "chkdsk C: /f /r /x" (replace "C:" with your system drive letter if it’s different). This command will attempt to fix any disk errors and bad sectors.

5. Perform a clean boot: A clean boot starts Windows with a minimal set of drivers and startup programs, allowing you to identify if any third-party software is causing the problem. Follow the steps provided by Microsoft’s official documentation on how to perform a clean boot.

6. Repair Windows using installation media: If all else fails, you can try repairing your Windows installation using an installation media. Boot your computer from the installation media and choose the "Repair your computer" option. From there, you can attempt an automated startup repair or use advanced troubleshooting tools such as system file checker (SFC) or DISM (Deployment Image Servicing and Management) to fix system files.

7. Seek professional help: If you’ve exhausted all the troubleshooting steps and are still unable to fix the startup issue, it might be time to seek professional assistance. Contact a reliable computer technician or your system manufacturer’s support for further guidance.

Remember, these steps depend on the specific situation, and the effectiveness may vary. It’s always a good idea to backup your important data before attempting any major troubleshooting, to avoid potential data loss.

How do I get my computer out of automatic repair loop?

If you find yourself stuck in an automatic repair loop on your computer, here are some steps you can take to troubleshoot and resolve the issue:

1. Restart your computer: Begin by performing a simple restart of your computer. Sometimes, the automatic repair loop itself can be a glitch that a restart can fix.

2. Check hardware connections: Ensure that all physical connections of your computer, such as the power cable, display cables, and peripherals, are secure and properly connected. Loose connections can sometimes cause issues that trigger the automatic repair loop.

3. Access Advanced Startup Options: If a normal restart doesn’t resolve the issue, you can try accessing the Advanced Startup Options menu. To do this, you might need to interrupt the normal boot process several times by forcefully shutting down your computer during the startup. Once in the Advanced Startup Options, you can choose different options to repair your system, such as Startup Repair, System Restore, or Reset PC.

4. Use System Restore: If you have recently made any changes to your computer’s settings or installed new software, you can try performing a System Restore. This process will revert your computer’s settings to an earlier point in time when it was functioning properly. Access the System Restore feature through the Advanced Startup Options menu mentioned earlier.

5. Check for disk errors: If none of the above solutions work, it’s possible that your computer’s hard drive is experiencing errors. You can try running a disk check utility like CHKDSK to scan for and fix any disk-related issues. Open Command Prompt from the Advanced Startup Options menu and enter the command "chkdsk C: /f /r" (without quotes). This command will initiate a disk check on your system drive (C:). Allow the scan to complete and follow any prompts that appear.

6. Perform a clean installation of the operating system: If all else fails, you may need to reinstall the operating system. This step will erase all your files and programs, so it’s crucial to back up any important data beforehand. You can create a bootable USB or DVD with the installation media of your operating system and follow the on-screen instructions to perform a clean installation.

It’s important to note that these steps may vary slightly depending on the specific operating system you are using. Additionally, if your computer is still under warranty or you are uncomfortable performing these troubleshooting steps yourself, it’s advisable to seek professional assistance.

What happens if startup repair doesn’t work?

When startup repair fails to fix the issue, it can be frustrating and leave you wondering what to do next. Here are some things you can try in such situations:

1. Diagnostic Tools: Use diagnostic tools to identify the specific problem affecting your startup process. Most operating systems, including Windows, have built-in diagnostic tools that can help pinpoint hardware or software issues.

2. System Restore: If you’re using Windows, try using the System Restore feature. This allows you to revert your computer’s settings to an earlier point in time when it was functioning properly. It can help resolve issues caused by recent software or system changes.

3. Safe Mode: Booting into Safe Mode loads only essential drivers and services, bypassing potential problems with third-party software or drivers. If startup repair doesn’t work, try booting in Safe Mode and then perform troubleshooting steps, such as updating drivers or uninstalling problematic software.

4. Repair Install or In-place Upgrade: Another option is to perform a repair install or in-place upgrade of your operating system. This process reinstalls the operating system while retaining your personal files and applications. It can fix issues with system files or configurations that may be causing the startup problem.

5. System Recovery or Reset: If all else fails, you may need to consider performing a system recovery or reset. This involves reinstalling the operating system from scratch, erasing all personal files and applications. Ensure you have backups of important data before proceeding with this step.

6. Professional Help: If you’re unable to resolve the issue on your own, it may be time to seek professional help. Contacting a technician or the customer support of the manufacturer can provide expert assistance tailored to your specific situation.

Remember, each startup issue can have unique causes, and these steps are general in nature. It’s important to consult official documentation or seek additional technical advice specific to your device and operating system to ensure the best course of action.

How to repair Windows 8.1 without CD?

Repairing Windows 8.1 without a CD can be a useful solution when you encounter issues with your operating system. Here’s a step-by-step guide on how to achieve this:

1. Use the built-in Windows recovery options: Windows 8.1 includes several built-in recovery options that can help you repair your system. Start by restarting your computer and tapping the F8 key repeatedly until the "Advanced Boot Options" menu appears.

2. Select "Repair your computer": In the "Advanced Boot Options" menu, use the arrow keys to navigate and select "Repair your computer" using the Enter key. This will take you to the Windows Recovery Environment (WinRE).

3. Troubleshoot startup issues: In the WinRE menu, choose "Troubleshoot" to access the advanced troubleshooting options. From there, select "Advanced options" and then "Startup Repair." This tool will attempt to repair any startup issues that may be affecting your system.

4. Use System Restore: If the startup repair doesn’t solve the problem, you can try using the System Restore feature. In the WinRE menu, select "Advanced options" and then choose "System Restore." Follow the on-screen instructions to select a restore point from a previous date when your system was working fine.

5. Run Automatic Repair: If the above steps haven’t resolved the issue, go back to the WinRE menu and select "Advanced options." From there, choose "Automatic Repair" to let Windows automatically fix any detected issues with your system.

6. Refresh or Reset your PC: If none of the above options work, you can try refreshing or resetting your PC. In the WinRE menu, select "Advanced options" and then choose either "Refresh your PC" or "Reset your PC." The "Refresh" option keeps your personal files and settings intact but reinstalls Windows, while the "Reset" option removes everything and reinstalls Windows from scratch.

It’s important to note that the availability of some advanced recovery options may depend on whether you created a system recovery image or have a recovery partition on your computer’s hard drive.

Repairing your Windows 8.1 system without a CD is possible thanks to the built-in recovery options provided by Microsoft. By following these steps, you can attempt to fix common issues and get your system back up and running without the need for external installation media.