how to connect soundcore earbuds to iPhone?

To connect Soundcore earbuds to an iPhone, follow these steps:
1. Make sure that your iPhone’s Bluetooth is turned on (Settings > Bluetooth).
2. Put your Soundcore earbuds into pairing mode by pressing and holding the power button for 3 seconds until you see a blinking LED light.
3. On your iPhone, search for "Soundcore" in the list of available devices and select it when it appears.
4. Once connected, you’ll hear a voice prompt saying "Connected".
5. You’re now ready to start listening to music!

If you have any issues connecting, make sure that both devices are close together and that there are no other nearby Bluetooth devices interfering with the connection process. Additionally, check if there are any updates available for your device firmware or app software as this can sometimes help resolve connectivity issues.

How do I put my Soundcore earbuds in pairing mode?

Do Soundcore earbuds work with iPhone?

Yes, Soundcore earbuds are compatible with iPhones. To get started, connect the earbuds to your iPhone via Bluetooth. On your iPhone, go to Settings > Bluetooth and select the name of your Soundcore earbuds from the list of available devices. Once connected, you should be able to use them with any audio or video app on your iPhone. If you have difficulty connecting or using the earbuds with your iPhone, please contact our support team for further assistance.

Why are my Soundcore earbuds not pairing?

It sounds like you are having difficulty getting your Soundcore earbuds to pair. First, I would suggest trying the following steps:
1. Make sure that the earbuds are charged and the LED indicator is solid blue.
2. Put your earbuds into pairing mode by pressing and holding both buttons for 3 seconds until you hear “Power on” and then release them quickly. The LED should be blinking blue and red at this point.
3. Open Bluetooth settings on your device (phone, tablet, computer, etc.) and locate the Soundcore model listed in available devices (it may take a few seconds to appear).
4. Select the model from available devices list to begin pairing process with your device.
5. Once completed successfully, you should see a confirmation message indicating that it is connected or paired with your device’s Bluetooth settings.
If these steps do not work, I recommend resetting your Soundcore earbuds by pressing both buttons for 10 seconds until you hear "Power off" followed by an automatic restart sequence of two beeps every second for 5 times before they turn off completely (LED will turn off). Then try again from step 2 above to re-pair them with your device’s Bluetooth settings once more. If problems persist after completing all of these steps please contact customer support for further assistance as there may be another issue that needs to be addressed beyond what can be troubleshooted here .

How do I reset my Soundcore Bluetooth earbuds?

To reset your Soundcore Bluetooth earbuds, you will need to follow these steps:
1. Make sure that the earbuds are powered off.
2. Find the small pinhole located on the back of each earbud and insert a paperclip into it.
3. Hold down the paperclip for about 10 seconds until you hear a low beep sound from both earbuds, then release it.
4. Your Soundcore Bluetooth earbuds should now be reset and ready for use again.
5. To pair them with your device, turn on your Bluetooth settings and select your Soundcore Bluetooth earbuds when they appear in the list of available devices nearby.
I hope this information helps!

How do I enable Bluetooth on Soundcore?

To enable Bluetooth on Soundcore, you will need to first make sure the device is powered on and in range of the device you would like to pair with. Once that is done, press and hold the power button for 3-5 seconds until the LED light flashes blue. This indicates that your device is in pairing mode and ready to be connected. You can then go into your device’s Bluetooth settings, select “Soundcore” from the list of available devices, and connect them together. For more detailed instructions specific to your model of Soundcore, please refer to its user manual or contact our customer support team for assistance.

How do I connect my Soundcore to Bluetooth?

To connect your Soundcore to Bluetooth, please follow these steps:
1. Make sure that both your device and the Soundcore are powered on and in pairing mode. Your device should be able to detect the Soundcore when it is in pairing mode.
2. On your device, open settings and go to the Bluetooth menu. Select the option to search for new devices or scan for nearby devices.
3. Once you have located your Soundcore, select it from the list of available devices, then enter any passcode if prompted by both devices.
4. Once connected, you will see an indicator light on both your device and the speaker indicating a successful connection has been made between them both.

If you experience any difficulty connecting your Soundcore to Bluetooth please check that both devices are compatible with each other before trying again or contact customer service for further assistance if needed.

Can Soundcore connect to Apple?

Yes, Soundcore is compatible with Apple devices. To connect your Soundcore device to an Apple device, you will need to follow these steps:
1. Open the Settings app on your Apple device and tap Bluetooth.
2. Make sure that Bluetooth is switched on and that it can be seen by other devices.
3. Put your Soundcore device into pairing mode (consult the user manual for instructions).
4. The Soundcore should now appear in the list of available Bluetooth devices on your Apple device – select it to pair it with your phone or tablet.
5. Once connected, you should be able to control audio playback from your Apple device using the buttons on the Soundcore itself or its associated app (if applicable).
I hope this helps – if you have any further questions please don’t hesitate to ask!

How do I make Soundcore discoverable?

In order to make Soundcore discoverable, you will need to put it in pairing mode. To do this, you should press and hold the power button on the device for three seconds until both the LED indicators flash blue. This indicates that your device is now in pairing mode and can be connected with other Bluetooth devices. If you are having difficulty connecting, please make sure that your other Bluetooth device is also in pairing mode and within range of your Soundcore speaker.

How do I resync Soundcore?

To resync your Soundcore device, please follow these steps:
1. Turn off the Bluetooth on your device and disconnect it from any other devices.
2. Turn off the Soundcore device (if applicable).
3. Turn on the Soundcore device, then press and hold the power button for 5 seconds until you see a white LED light blink rapidly.
4. Re-enable Bluetooth on your device and search for available Bluetooth devices to connect to. You should see an option for “Soundcore”; select it to pair your device with the speaker.
5. Once paired, you can start playing audio from your connected device as normal.
If you experience any issues during this process, please refer to our troubleshooting guide or contact customer support for additional help resolving the issue: https://www.soundcoreaudiohelpcenter-en-us/hc/en-us/sections/360000820453-Troubleshooting

Why is my right Soundcore earbud not working?

I apologize for the inconvenience you’re experiencing with your Soundcore earbuds. To troubleshoot this issue, I recommend following these steps:
1. Make sure both of your Soundcore earbuds are properly charged and connected to the same Bluetooth device.
2. Ensure that all programs or applications using sound on your device are closed down when attempting to pair the earbuds.
3. Disconnect any other Bluetooth devices in the area and reset your audio device’s connection list by turning off Bluetooth and back on again with only one of your headphones connected at a time (for example, connect right headphone first and then left).
4. Reset both of your headphones by pressing and holding the multi-function button for about 10 seconds until you hear "Power Off" from each side indicating that they have been reset successfully.
5. Reconnect them to your audio device using the instructions provided in their user manual or product page online.
6. If possible, try another audio device to see if that resolves the issue as well as checking if there is an update available for either the headphones or audio device itself through their official websites/applications if applicable (Soundcore app).
If none of these steps resolve the issue please reach out to our customer service team who will be more than happy to help!